Longer endurance, more intelligence
CN
Hercules II

SMD Hercules II UAV

SMD Hercules II UAV is made from 3K pure carbon fiber and magnesium titanium alloy. It has high aerodynamic efficiency, fast and convenient assembly and simple operation. The whole aircraft body adopts advanced composite processing technology, with high structural strength, long service life and beautiful appearance.





Hercules II Flight platform parameters


S/N
Name
Parameters and indicators
1
Body size
1600X1600mm
2
Wheelbase
1600mm
3
Wind resistance
level 6
4
Endurance time
The maximum endurance is 105 minutes under no-load, 50 minutes under full load
5
Applicable altitude
≥ 3000m
6
Protection grade
IP56, double redundancy or above body sensor system,with landing protection function.
7
Operating temperature range
- 20 ~ 60 ℃
8
Working relative humidity

≤ 95% (+ 25 ℃)



Flight intelligent control system


A. Fully autonomous flight

Check before flight, select the take-off point and landing point, and the aircraft will automatically start the altitude measurement program for line patrol flight. After completing the aerial survey mission, it will land automatically.


B. Route

The route is generated by one click, and the aircraft flies according to the planned serpentine and structural route, pressing the route. The ground station monitors the flight status of the aircraft in real time.


C. Fault protection

When the flight power is insufficient or the power is close to the critical point, or the remote control and ground station signals are lost, the aircraft will automatically start the return procedure, or select the nearest landing point for safe landing according to the map terrain.


D. Ground following

Set the ground clearance altitude according to the planned route. When the terrain changes, the aircraft will automatically measure and adjust to the preset ground clearance altitude and always maintain the preset altitude.



Ground station platform system


◆ Emergency return

◆Real time monitoring of aircraft indicators

◆ Automatic route planning and segmentation

◆ Support emergency route planning

◆ Support changing tasks at any time

◆Support strip route planning

◆ Real time update of the whole survey area

◆ Download and playback of flight log

S/N
Name
Parameters and indicators
1
The ground station software
has the functions of displaying real-time video picture and map picture of work area, automatically generating route during regional patrol inspection, displaying flight platform status parameters, mission load status parameters and abnormal information alarm.
2
Screen size
10.4 inches, brightness 1000 lumens
3
Interface
HDMI * 1, USB3. 0*2
4
Communication link
20km
5
The real-time recording and display function can record, transmit and display the working status, flight path and other information of each subsystem on the ground station in real time, and can be played back and exported.
6
Image information and infrared image storage function The captured image information and infrared image can be stored in airborne equipment and ground station.
7
The flight log data download and analysis tool It has a flight log data download and analysis tool.
8
The flight data online recording function
It has the flight data online recording function.